Musati as tools for editing an already sharpened blade;
Musat - rods for sharpening knives.
Products are made from various materials, as they perform a different function:
sharpening pins peel metal from the edge of the tip, sharpening it into an acute angle;
dressing tools - just clean the sharpened edge of the blade from the metal serrated fringe and correct the unevenness of the edge.
Ceramic musat.
Ceramic coating,/ceramic made as well as with a “diamond”, is used both for sharpening and for grinding the tip. Ceramic rods are round or oval.
Tool Advantages:
- Superhard.
- After processing, the cutting edge of the torch is less abrasive and smoother.
- Ceramic stylus suitable for sharpening a butcher's tool.
Musat does not damage the cutting edge, which means that it can be used for sharpening the maximum number of times, for example, professionals sharpen the tool before each use.
But the really dull knives can not be sharpen with musat. Should be done sharpening service.
Sharpen without a strong pressure on the musat. The whole hand should participate in the process, do not bend your wrist.
Editing an already sharp blade occurs as follows: with the lightest touch, alternating the right and left sides of the blade, draw 2-4 times along the core of the garbage.
TIPS
- Sharpening forces should be distributed evenly.
- The blade and musat must touch each other on the cutting edge.
- Both sides of the knife should be alternately machined with a bar. You can not spend several times at first on one side, and then on the other.
- Use metal debris only for sharpening, and use a diamond-coated and ceramic-coated axle for sharpening and grinding.
- If it is difficult for you to determine the bevel angle of the blade edge yourself, then consult the manufacturer or a specialized store.
- When sharpening, be careful and focused, as this is an unsafe business.
- After sharpening and checking for sharpness, rinse the cutter in warm water with any cleaning agent, and then wipe dry.
- Movements should be as smooth as possible.